ropbo
Jun 23, 05:16 PM
In many cases, compulsion to buy the latest gadget.
InuNacho
Apr 19, 04:23 PM
Unreal 2004 struggles on my 2008 Macbook. I'm sure the current Macbook graphics are a step up, but not by much.
brn2ski00
Jun 24, 08:03 AM
Wait, did I get the purple sock or did Kuebby?
You both did. If you see the original post, there were 2 purple socks! :)
You both did. If you see the original post, there were 2 purple socks! :)
Tibs066
Mar 13, 08:09 PM
Just to put my exrierence out there i had, yours look like an exact picture of mine and then i when i sent mine in to get the screen fixed they would not do it due to the fact that the damage could be down in the logic board. So i ended up paying the 250 for the replacement.
Thanks Brian
Thanks Brian
more...
Zermelo
May 5, 07:47 PM
Can u receive replies?
It's just like normal texting, you can send and receive.
It's just like normal texting, you can send and receive.
NickFalk
Dec 11, 03:41 AM
Hi there a few months back I upgraded my G4 733Mhz Quicksilver with a dual 1,6 Ghz card from Powerlogix. I initialy experienced some problems with the computer turning off on it's own accord after an hour or so of use. After changing the settings in the energy-panel to highest performance this seemed to stop.
Anyway I recently had the brilliant idea (not) of replacing the fan above my harddisk in the vain hope to reduce some noise (which has been the only negative side to my experience with this computer). Everything seemed to work fine initially but suddenly the machine once again started to switch off on it's own account.
I therefore put the original fan back, but the machine still switches off when I push it just a little bit too hard. Nothing fancy really, just a few apps open and running MAME. According to Powerlogix CPU Director was running just south of 109 F when the machine swithched off.
This of course makes me worry more than just a little bit.
My only*real hope is that I have maybe inserted the original fan backwards? Could someone just please tell me whether the sticker on the fan should point outwards into the computer or if it should be pointing away, into the "wall" not being visible.
Thanking you all in advance for your kind help! :)
Anyway I recently had the brilliant idea (not) of replacing the fan above my harddisk in the vain hope to reduce some noise (which has been the only negative side to my experience with this computer). Everything seemed to work fine initially but suddenly the machine once again started to switch off on it's own account.
I therefore put the original fan back, but the machine still switches off when I push it just a little bit too hard. Nothing fancy really, just a few apps open and running MAME. According to Powerlogix CPU Director was running just south of 109 F when the machine swithched off.
This of course makes me worry more than just a little bit.
My only*real hope is that I have maybe inserted the original fan backwards? Could someone just please tell me whether the sticker on the fan should point outwards into the computer or if it should be pointing away, into the "wall" not being visible.
Thanking you all in advance for your kind help! :)
more...
anjaki
Aug 22, 11:34 AM
Is it animated?
ahunter3
Dec 9, 05:16 PM
who still uses OS9 and for what??:confused:
� I will be booting into it this weekend to import records from a 17-file FileMaker 6 solution into intermediate files (which have both the old and the new table structure) and then into the final structure. The speed boost over OS X is somewhere between threefold and fourfold for the involved functions.
� I boot into 9 to scan. I have two scanners, both decently good, neither with OS X drivers available. The Umax Astra slide scanner was noted as having very good color values for the price, and the price was low due in part to lack of OS X drivers. The old flatbed, a Umax 630, is a 3-pass SCSI scanner that will probably still be humming along nicely when MacOS 10.9 is becoming obsolete.
� I have my older computer off to my left here as I type on this one. I Timbuktu into the older one to handle a chore that it does better (under MacOS 8.6, mind you, not even 9) than OS X does on the fastest machines in the shop: opening up folders on a mounted server folder that are chock-full of huge TIFF and Photoshop images, and copying selected files to a folder from a different mounted server volume also chock-full of huge TIFF and Photoshop images. OS X thinks its doing me a favor by trying to conjure up and display a thumbnail of each image based on actual file content. OS 9 doesn't do that (only displays the little classic-mac custom icons generated by Photoshop, if present), enabling an eleven-year-old PowerMac 7100 with a 300 MHz G3 accelerator and 10-base-T networking to do this task as well as dual-G5 Macs with gigabit ethernet...and blow my OS X PowerBook completely out of the water.
Don't knock OS 9. It certainly had its shortcomings (especially with regards to memory, oy vey) but it also had a great deal of sophistication �€�? lots of little things that had started off great or evolved to greatness. It was the best all-around small computer operating system of the 20th Century. I'd still use it over XP, or the first few iterations of OS X.
� I will be booting into it this weekend to import records from a 17-file FileMaker 6 solution into intermediate files (which have both the old and the new table structure) and then into the final structure. The speed boost over OS X is somewhere between threefold and fourfold for the involved functions.
� I boot into 9 to scan. I have two scanners, both decently good, neither with OS X drivers available. The Umax Astra slide scanner was noted as having very good color values for the price, and the price was low due in part to lack of OS X drivers. The old flatbed, a Umax 630, is a 3-pass SCSI scanner that will probably still be humming along nicely when MacOS 10.9 is becoming obsolete.
� I have my older computer off to my left here as I type on this one. I Timbuktu into the older one to handle a chore that it does better (under MacOS 8.6, mind you, not even 9) than OS X does on the fastest machines in the shop: opening up folders on a mounted server folder that are chock-full of huge TIFF and Photoshop images, and copying selected files to a folder from a different mounted server volume also chock-full of huge TIFF and Photoshop images. OS X thinks its doing me a favor by trying to conjure up and display a thumbnail of each image based on actual file content. OS 9 doesn't do that (only displays the little classic-mac custom icons generated by Photoshop, if present), enabling an eleven-year-old PowerMac 7100 with a 300 MHz G3 accelerator and 10-base-T networking to do this task as well as dual-G5 Macs with gigabit ethernet...and blow my OS X PowerBook completely out of the water.
Don't knock OS 9. It certainly had its shortcomings (especially with regards to memory, oy vey) but it also had a great deal of sophistication �€�? lots of little things that had started off great or evolved to greatness. It was the best all-around small computer operating system of the 20th Century. I'd still use it over XP, or the first few iterations of OS X.
more...
Jetson
Jan 3, 02:37 PM
I haven't have any problems burning AAC to CD.
Here is a link to a discussion of AAC issues. Hopefully your answer is there (if you've not already seen this website).
Good luck.
the.taoofmac.com/space/AAC (http://)
Here is a link to a discussion of AAC issues. Hopefully your answer is there (if you've not already seen this website).
Good luck.
the.taoofmac.com/space/AAC (http://)
Moof1904
Feb 24, 10:06 AM
I'll attach the drive to the PC and see if there are any permissions issues. It will be next week before I have access to my friend's PC again.
more...
richie
Oct 17, 04:30 AM
Same thing happened to many many Cubes, including mine. I rang up Apple, they sent some guys over the next day, they picked it up, and the next day, bam, back it was, all fixed up. I was impressed.
Of course, since the Cube's been on ice for so long, maybe Apple support won't be quite as helpful... but it's worth a shot. :) As somebody said, it is a known issue, and they seem willing to fix it at no cost.
Of course, since the Cube's been on ice for so long, maybe Apple support won't be quite as helpful... but it's worth a shot. :) As somebody said, it is a known issue, and they seem willing to fix it at no cost.
jdreier
Apr 29, 01:02 PM
I've recently installed a 2.33ghz c2d chip in my old 1.66 cd mac mini. The performance boost has been great!
I've noticed temps have gotten a little high while running encodes and such... around low - mid 90s C while handbrake is encoding. I know this is still within operating temperature, but i'd like them to be a little lower.
I managed to keep the plastic clips from breaking while installing my cpu. I've been thinking about replacing the nylon clips with some nylon screws, like others have mentioned.
My question, Do people use the springs that came with the clips when installing the screws? Or do people just screw the heatsink down snug to the cpu without the springs?
Thanks,
I've noticed temps have gotten a little high while running encodes and such... around low - mid 90s C while handbrake is encoding. I know this is still within operating temperature, but i'd like them to be a little lower.
I managed to keep the plastic clips from breaking while installing my cpu. I've been thinking about replacing the nylon clips with some nylon screws, like others have mentioned.
My question, Do people use the springs that came with the clips when installing the screws? Or do people just screw the heatsink down snug to the cpu without the springs?
Thanks,
more...
clayj
Sep 22, 06:52 PM
It was originally 250 and it was one that was up for the 100 dollar rebate. When i ordered it the website said that it was on back order adn that it would probably take 6 weeks to get here, which did not bother me seeing as i did not need it right away.
I just called them and they said it was discontinued and that they no longer carried it. Meaning that i ordered a printer 5 weeks ago that in the end would never get here. I am peeved because when i ordered the printer it was not discontinued. And while there are some other printers availible they are not the ones that i want!! I want the one i ordered 5 weeks ago.
Apple should at least honor the orders that were mad for that printer before it was discontinued!!Seems to me that the reason the printer was originally on backorder was that it HAD been discontinued (by the manufacturer), but Apple didn't know that yet... all they knew was that they were out of stock and that the product was backordered for that reason. As soon as they found out that no more printers would be available, they e-mailed everyone who had the printer on backorder and let them (and you) know that it would not be available.
Tough break, but you can't expect Apple to conjure a printer for you out of thin air. Perhaps they will give you a comparable rebate on a similar printer, but they're under no obligation to.
I just called them and they said it was discontinued and that they no longer carried it. Meaning that i ordered a printer 5 weeks ago that in the end would never get here. I am peeved because when i ordered the printer it was not discontinued. And while there are some other printers availible they are not the ones that i want!! I want the one i ordered 5 weeks ago.
Apple should at least honor the orders that were mad for that printer before it was discontinued!!Seems to me that the reason the printer was originally on backorder was that it HAD been discontinued (by the manufacturer), but Apple didn't know that yet... all they knew was that they were out of stock and that the product was backordered for that reason. As soon as they found out that no more printers would be available, they e-mailed everyone who had the printer on backorder and let them (and you) know that it would not be available.
Tough break, but you can't expect Apple to conjure a printer for you out of thin air. Perhaps they will give you a comparable rebate on a similar printer, but they're under no obligation to.
rohn
Oct 26, 10:04 AM
I live in Lake Worth, I should be there before 6
more...
eternlgladiator
Apr 17, 08:43 PM
Yes this'll work. I don't know why dqpassat is having problems though as the cpu speed has nothing to do with this.
Great. Thanks!
Great. Thanks!
angelneo
Mar 29, 09:38 AM
The Sega Genesis collection will keep you busy if you like old school games since Phantasy Star IV alone is a good 10 hours to beat. Ratchet and Clank maybe?
I recommend the Sega Collection as well, maybe it's because I'm used to have such great time playing them when I was younger. I'm now playing some of my old favourite sega games on my psp as well. (Shining Force 1&2, Warsong).
Other than that, I would say maybe MGS: Portable Ops. or X-men:Alliance.
I recommend the Sega Collection as well, maybe it's because I'm used to have such great time playing them when I was younger. I'm now playing some of my old favourite sega games on my psp as well. (Shining Force 1&2, Warsong).
Other than that, I would say maybe MGS: Portable Ops. or X-men:Alliance.
more...
Nereus
Dec 17, 12:31 PM
Please let us know how it work out.
Good luck!
Sushi
Thanks Sushi! :)
Good luck!
Sushi
Thanks Sushi! :)
Sdashiki
Sep 23, 10:33 AM
Well duh, house of straw and sticks blew away, brick stands strong.
Why people in Homestead, Florida had built their houses out of either ALL WOOD or only first floor cement walls is beyond me.
Living in florida, near the coast, your house SHOULD NOT be made of "weak" building materials. Thats just common sense.
Why people in Homestead, Florida had built their houses out of either ALL WOOD or only first floor cement walls is beyond me.
Living in florida, near the coast, your house SHOULD NOT be made of "weak" building materials. Thats just common sense.
Toreador93
Dec 16, 11:10 PM
I'd just like give my impression of the SD300 to help Nesuser2.
I bought my SD300 this past summer, and it's been great. It's really a small camera, I can't say I've seen anything with as many features relative to its size and price. Pictures are great, and movies are very impressive with this camera (it can do 640x480 & 320x240@30fps & 15fps). However, you may need a high-speed card for multi-minute movies. My 1gb Sandisk Ultra II can take 8.5 minutes at highest quality. 320x240@15fps will give you 46 minutes of video. 1gb will give you about 500 highest quality pictures (4mp, Superfine res). 4mp and normal res will give you about 1700.
It's mostly metal (except for the card/battery door), and feels very solid. Quality is very good compared to similarly priced cameras.
You should really check out THIS REVIEW (http://www.dcresource.com/reviews/canon/powershot_sd300-review/) if you're at all interested.
I bought my SD300 this past summer, and it's been great. It's really a small camera, I can't say I've seen anything with as many features relative to its size and price. Pictures are great, and movies are very impressive with this camera (it can do 640x480 & 320x240@30fps & 15fps). However, you may need a high-speed card for multi-minute movies. My 1gb Sandisk Ultra II can take 8.5 minutes at highest quality. 320x240@15fps will give you 46 minutes of video. 1gb will give you about 500 highest quality pictures (4mp, Superfine res). 4mp and normal res will give you about 1700.
It's mostly metal (except for the card/battery door), and feels very solid. Quality is very good compared to similarly priced cameras.
You should really check out THIS REVIEW (http://www.dcresource.com/reviews/canon/powershot_sd300-review/) if you're at all interested.
mkrishnan
Feb 16, 02:07 PM
For Firefox, is there a reason you're using Tabbrowser Extensions and not Tabbrowser Preferences?
Oooh, love your screenname, btw. :D
Yes there is: because there were some specific features in TBE that were not in TBP that I wanted. When I got FF 1.0, I installed TBP because TBE wasn't in the extensionroom anymore (because it was deprecated), but I didn't find everything I wanted in it, so I canned it and googled TBE out of hiding.
That was the main reason. And the only other extension I use is AdBlock, so I haven't seen any extension-extension grousing. But maybe I need to take another look at TBP at some point and see if I indeed want to play by the rules and migrate.
TBE is still active, running through the night like a guerilla soldier. It was updated in mid-January, at least.
EDIT: Hehehe, sorry, I thought you were asking me, but it makes more sense if you're asking the OP. :rolleyes: I don't want to sound patronizing, but you didn't get TBP by accident when you installed FF on your Mac, because TBE is not in the extensionroom, did you? That would explain why a lot of the options are missing. :D But it sounds like you know too much to get caught by that one.
Oooh, love your screenname, btw. :D
Yes there is: because there were some specific features in TBE that were not in TBP that I wanted. When I got FF 1.0, I installed TBP because TBE wasn't in the extensionroom anymore (because it was deprecated), but I didn't find everything I wanted in it, so I canned it and googled TBE out of hiding.
That was the main reason. And the only other extension I use is AdBlock, so I haven't seen any extension-extension grousing. But maybe I need to take another look at TBP at some point and see if I indeed want to play by the rules and migrate.
TBE is still active, running through the night like a guerilla soldier. It was updated in mid-January, at least.
EDIT: Hehehe, sorry, I thought you were asking me, but it makes more sense if you're asking the OP. :rolleyes: I don't want to sound patronizing, but you didn't get TBP by accident when you installed FF on your Mac, because TBE is not in the extensionroom, did you? That would explain why a lot of the options are missing. :D But it sounds like you know too much to get caught by that one.
simsaladimbamba
Apr 26, 05:31 AM
No.
http://store.apple.com/us/product/H0321VC/A
http://www.gizmag.com/lmp-bluetooth-keypad/17125/
http://store.apple.com/us/product/H0321VC/A
http://www.gizmag.com/lmp-bluetooth-keypad/17125/
iMattcotv
Mar 8, 10:16 PM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_2_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8C148 Safari/6533.18.5)
I
I
Meltdownblitz
May 1, 09:35 PM
Does anyone know where I can buy the Speck see thru satin in Canada? Shipping from the speck site is $14.85.. :eek:
No but try amazon, ebay, target maybe? and I heard Microcenters have them too if you have that there.
No but try amazon, ebay, target maybe? and I heard Microcenters have them too if you have that there.
asdad123
Apr 3, 08:27 PM
Its pretty easy to put on the SGP protectors. A word of advice is to do it in a bathroom after running a hot shower for a little until it steams up a bit. This will make sure there is as little dust as possible flying around.
If you do get some dust under the screen, use two pieces of duck tape. Put one on the protector to lift it up and then the second piece to grab a hold of the dust. I just took two pieces of dust out from underneath my Ultra Optics SGP.
If you do get some dust under the screen, use two pieces of duck tape. Put one on the protector to lift it up and then the second piece to grab a hold of the dust. I just took two pieces of dust out from underneath my Ultra Optics SGP.
No comments:
Post a Comment